Introduction:
JIC Fitting is a selection of hydraulic fittings which is made in accordance to the SAE J514 standards. The acronym JIC stands for Joint Industry Council. It is likewise known as the JIC thirty seven degrees flare fitting as it’s a thirty seven degrees flare seating area. These fittings are utilized on oil hydraulic systems in fields which are several (fuel delivery, fuel power application, shipbuilding, mobile hydraulic tools, etc…). A JIC fitting device has 3 parts that create a tubing assembly: fitting, flare nut, and sleeve.
Material:
Materials used to fabricate JIC fittings include stainless steel as well as carbon steel SS316L.
Sizes:
JIC frame and flare nut are available in outer diameter (“OD) sizes between 1/8″ to 1 2”. Sleeve has 2 different reading measurements, metric size (mm) & inch outer diameter (“OD). Sleeve size can be bought from 3mm to 50mm and 1/8″ to 2”. Fitting sizes are designated by the corresponding outside diameter of the tubing for the numerous kinds of tube ends.
Working Pressure:
The conventional functioning stress of the fittings ranges from thousand to 5000 psi for different sizes and contacts. The minimum burst stress is four times the working pressure. The JIC fittings must be able to withstand twice the working stress for a period of one minute with no leakage or failure.
Remember to take note that the pressure rating of an exact same fitting might vary when it’s connected to distinct equipments.. For example, if a fitting with a reduced working pressure is linked to a pipe, it will result in an overall much lower functioning pressure. In all cases, constantly take into account the lowest pressure as the maximum working pressure of the product.
Just how long to lose belly fat reddit (kwjea.com) does a JIC fitting works: For tube connections, the assembly therapy begins out of the planning of the hose. To begin with, the nut as well as sleeve are inserted onto the end of a hose. With all the use of a flaring tool, form the end of the tube to 37 degrees. Next, tighten the nut by implementing a spanner till the nut is tight and also the sleeve grips onto the tube. In case the fittings are bench put together, the gripping measures may be determined by revolving the tube by hand as the nut is pulled down. When the tube can no longer be rotated by hand, the sleeve has gripped upon the tube. When this happens,, tighten the nut by turning it one full turn. This might vary more or less with different tubing substances, but for basic practice, it is a very good rule to adhere to.
Configurations of JIC Fitting: Commonly used connection sorts consist of: JIC/BSPP Male Connector, JIC/ NPT Male connector, JIC union, JIC/NPT Swivel Male Connector, JIC/BSPP Swivel Male Connector.
Brand of JIC Fittings:
HS Corporation is a Korean manufacturer specializing in JIC Fitting. Established in 1980, HS Corporation has more than thirty years of specialized knowledge in manufacturing fittings.