The Ghost is a car immobiliser fitted to the vehicle’s data CAN-BUS network. It needs a 4 digit pin code to begin the engine. This pin pad is made of buttons already present inside the car, like the volume and window controls as well as stereo mute, cruise control , and ignition. The immobiliser can then be programmed to respond to these inputs once it’s been installed. The Ghost is more secure than other systems, and it costs less to install.
The Ghost car immobiliser will not operate with key fobs or LED indicators. Instead, it utilizes buttons inside the vehicle to send a signal to an external computer. To stop the car from beginning to start, the immobiliser is issued a PIN code whenever the vehicle is on. It is simple to set up, and users can alter their password at any point. After the system has been put installed, it automatically deactivates when the car is switched off.
The Ghost Car Security car immobiliser is easy in its design. Every when the car starts it requires the driver to enter a unique PIN number. The PIN code can be up to 20 digits , ghost alarm and only the owner has the correct code to start the car. Due to its security at a low level and low-level security, the Ghost immobiliser is now an integral part of the beginning process. If the owner has the correct PIN code, the device will prevent cloning of keys and replacing the ECU in the car.
The ghost Vehicle security car immobiliser is compatible in conjunction with the car’s CAN data network. It doesn’t require a key fob and is entirely silent. It does not allow for the cloning of keys or ECUs. Resets are possible with the personal PIN code. The Ghost car immobiliser is fully weatherproof and functions via Bluetooth. It can be concealed almost anywhere inside the car. The system is so hard to bypass that thieves won’t be able to bypass it.
The Ghost car immobiliser is weatherproof and can be easily installed in the car. It comes with a PIN number that can be altered without the requirement of keys. In addition, it has a reset code that enables the vehicle to be started without a PIN. It can be shut off from service mode according to the speed and duration of the vehicle. It also gives the owner an emergency code that is secure and can’t be copied.
The Ghost car immobiliser is a chip and auto watch Ghost pin system which communicates with the car’s ECU unit. It’s not detected by thieves, and it prevents key cloning as well as ECU swapping. With the Ghost the only way to gain access to the vehicle is via the code that is unique to it. This key will not permit anyone else to access the engine of the car. This key is an important feature of an auto-immobiliser. It also helps to prevent the theft of other vehicles.
The ghost tracker car immobiliser is tiny and ghost car security weatherproof, and it works with a vehicle’s ECU unit. Radio signals are used to connect with the vehicle’s PIN. This system will not allow thieves to use the vehicle’s PIN without owner’s consent. Its unique PIN code is only applicable to the Ghost vehicle. It also stops ECU swapping. The new PIN will be generated after the key has been removed from the Ghost immobiliser.
Unlike the standard key fob The Ghost car immobiliser does NOT need radio frequency. By using pins, it can communicate with the CAN system of your vehicle. It can be connected without the use of key fobs or radios to any vehicle. The owner can use their own PIN code to unlock the vehicle. However it is also true that the Ghost car immobiliser can’t be detected by software for diagnosis and emits no radio signals.
To connect to the vehicle’s ECU unit, the Ghost car immobiliser makes use of chips and a distinct pin code. In turn, it stops unauthorised drivers from taking the vehicle or causing the car to malfunction. It works with vehicles equipped with CAN-BUS and Ghost Car Security CAN-CEN. If your vehicle doesn’t have these features, the Ghost isn’t for you. It’s an immobiliser which can be fitted to any vehicle.